New herringbone block paved driveway with a charcoal border, channel drain and wide steps to the front door in Maidenhead

Block Paving Pros and Cons for Driveways

Block paving is a strong, repairable driveway surface, but standard blocks shed rainwater and the joints need upkeep.

This guide sets out the block paving pros and cons: strength, repairs, patterns, planning rules, permeable options and maintenance.

What Block Paving Is: Small Blocks Locked Together on Sand

Block paving is a surface of small concrete or clay blocks, laid on sand inside a fixed edge.

Fine, dry sand is brushed into the joints and compacted with a vibrating plate. The blocks then lock together and act as one surface. That spreads the weight of a car evenly.

The Interpave design guide lists 50 mm blocks for driveways, patios and paths.

Standard block paving is impermeable. Government guidance groups it with asphalt and concrete, so rain runs off rather than soaking through.

The Main Block Paving Pros and Cons

Block paving pros and cons come down to strength and easy repairs against drainage rules and joint upkeep. The advantages and disadvantages of block paving are listed below.

Pros

  • Strong: interlocking blocks share the load of cars evenly.
  • Ready to use: concrete block paving can be used as soon as laying is complete.
  • Repairable: sections lift out and go back with the original blocks.
  • Design choice: a wide range of shapes, sizes, colours, finishes and laying patterns.

Cons

  • Drainage: standard blocks are impermeable, so larger front gardens may need planning permission.
  • Joint sand: it can blow or wash out in early life and needs topping up.
  • Weeds and moss: growth appears in joints that stay shaded or damp.
  • Sealers: optional, but they can change the colour and grip and need reapplying.
  • Lime bloom: new concrete blocks can show temporary white patches.

Strength: Interlocking Blocks Carry the Weight of Cars

Block paving is strong because the blocks interlock and share each load. Interpave describes concrete block paving as extremely durable and easy to maintain.

The laying pattern affects that strength. Herringbone block paving is the most effective pattern for areas that take cars. It is set at 45 or 90 degrees to the longest straight edge.

Herringbone reduces creep, where blocks slowly shift under traffic, and spreads wheel loads more evenly. Stretcher bond suits paths and very light traffic. Basket weave suits foot traffic only.

Block paved drive curving past a slatted fence, hedge and lawn edge in Wokingham

Repairs: Sections Lift Out and Go Back With the Same Blocks

Block paving is easy to repair because damaged areas can be lifted and relaid with the original blocks.

Interpave likens this to unzipping the surface, with no sign of the repair afterwards. Asphalt repairs, by contrast, leave visible patches.

This helps when a pipe or cable under the drive needs work. A sunken area can also be lifted, rebedded and relaid with the same blocks.

Colours, Finishes and Laying Patterns

Block paving comes in a wide range of shapes, sizes, colours and finishes, with concrete colours from UV-stable pigments.

Brindle blocks blend two or more colours, such as black, red and buff. Weathered blocks give an older look, close to stone setts or clay bricks.

Coloured blocks can form borders, patterns or markings within the drive. A contrasting border course frames the drive and defines its edges.

Block paved driveway in mixed tones up to a bungalow front door in Wokingham

Compare samples wet and dry, and beside the house brick, before choosing.

Drainage and Planning Rules for Block Paving Driveways

A front garden drive of standard block paving over 5 m² needs planning permission. The exception is when rainwater runs to a lawn or border and drains naturally.

Permeable surfaces need no permission at any size, according to the Planning Portal.

These government rules have applied since 1 October 2008. They aim to cut flooding and pollution from paved front gardens. Runoff from hard surfaces carries oil, petrol and brake dust into drains, and often on to rivers.

The permitted development rules don't cover flats, maisonettes or converted houses. They also don't apply where an Article 4 Direction or planning condition restricts them.

Ways to Keep Standard Block Paving Within the Rules

  • Lay the drive to fall towards a lawn or planted border.
  • Direct the water into a rain garden or soakaway, kept clear of the house foundations.
  • Fit a channel drain where the drive slopes towards the house, linked to the roof water drains.
  • Use permeable block paving instead.

A new access across a pavement also needs a dropped kerb. The Planning Portal states that dropping a kerb without an application is illegal.

In Wokingham Borough, council approval is needed to create or extend a vehicle access. In Wokingham and Bracknell Forest, only council contractors build the crossing.

Permeable Block Paving Needs a Different Sub-Base and Care

Permeable block paving lets rain soak through gaps around the blocks into the ground below. It needs no planning permission at any size.

The difference is underneath. Standard drives sit on a Type 1 sub-base, which has fine material that slows water down.

Permeable drives use an open-graded sub-base, such as 4/20 or Type 3. Its larger stones leave spaces that store water while it soaks away.

On heavy clay, a pipe in the sub-base is a wise precaution, carrying extra water to the roof drains. Drives steeper than 1 in 20 may not suit permeable paving at all.

The government guidance lists two trade-offs. Permeable systems can cost more, and they need a contractor who knows how to build them.

Caring for Permeable Block Paving

  • Clear leaves, mud and litter before they clog the surface.
  • Remove weeds by hand or with a weed burner, not weed killer.
  • Never spread sand or soil over the surface.
  • Don't mix concrete on it or let garden beds drain onto it.
  • Unclog a blocked surface with a small vacuum sweeper or jet washer.

Pro Tip: Test a finished permeable drive with a hosepipe for 1 to 2 minutes. The water should soak straight in, with no puddles.

Block Paving Maintenance: Joint Sand, Weeds, Stains and Sealing

Block paving maintenance is mostly regular brushing and keeping the joints full of sand.

In early life, jointing sand can blow out in dry weather or wash out on slopes. Inspect new paving regularly and top up the joints.

Brush new paving by hand until the joints settle, as suction sweepers can pull the sand out. Pressure washers can strip it too, so refill the joints once dry.

Moss and algae grow where paving is heavily shaded, under trees or poorly drained. A cleaner made for the purpose removes it, but growth returns if the area stays damp.

New block paved drive entrance beside a black gate and herringbone footpath in Wokingham

Blot fresh oil spills with paper or cloth straight away. Wiping drives the oil in and spreads the stain. Tyre scuffs usually lift with hot water and strong detergent.

New concrete blocks can show white patches called lime bloom. It is temporary, more common in winter, and usually weathers away within a year or two.

Sealing Is Optional, With Trade-Offs

A sealer can help hold the joint sand, slow weeds and resist stains. It can also change the colour and grip, and it needs reapplying over time.

Sealer goes onto clean, dry paving between 5 and 30°C, with no rain forecast for 8 hours.

Sinking and Ruts Start Below the Blocks

The sub-base is the layer that stops a block paving driveway rutting under cars.

A simple peg test checks the ground. A 50 mm peg that drives easily past 150 mm means soft soil needing expert advice.

Soft spots found during the dig-out should be removed and refilled with sub-base. A geotextile over the soil helps stop the sub-base sinking and helps prevent weeds. Patios fail the same way, as set out in this guide to sunken patio slabs.

Edge restraints are needed at every boundary of the paved area. They stop the blocks spreading or rotating, and stop the sand bed escaping.

Long block paved driveway beside a slatted fence in Wokingham

The drive also needs a fall. Government guidance says to slope drives away from the house, towards the road, where possible.

Is Block Paving Worth It? Questions to Answer Before Choosing

Block paving suits drives that take cars every day and may need lifting for repairs later. These questions test the block paving pros and cons against a real drive:

  • Is the front garden drive over 5 m², and where will the rainwater go?
  • Does the drive slope towards the house and need a channel drain?
  • Is the soil heavy clay, which may need a pipe in a permeable sub-base?
  • Is the drive steeper than 1 in 20, which may rule out permeable paving?
  • Is the drive shaded or under trees, where moss and algae are more likely?
  • Is a new or wider dropped kerb needed, with council approval?
  • Which laying pattern, sub-base and edge restraint does the quote include?

Conclusion: Block Paving Pros and Cons Come Down to the Base and Drainage

In short, block paving pros and cons balance strength and easy repairs against drainage rules and joint upkeep.

Standard blocks in front gardens over 5 m² need rainwater sent to a lawn, border or soakaway. Herringbone, solid edge restraints and a compacted sub-base help keep a block paved driveway level.

Frequently Asked Questions

Does a block paving driveway need planning permission?

Only in some cases. Standard block paving over 5 m² in a front garden needs permission. The exception is rainwater draining to a lawn or border. Permeable block paving needs none at any size. Flats, maisonettes and Article 4 areas follow different rules.

Is block paving worth it?

For a drive used by cars every day, block paving offers strength, easy repairs and wide design choice. The main block paving driveway pros and cons to weigh are drainage, joint top-ups and occasional weeding.

Why do new concrete blocks turn white in patches?

This is lime bloom, a natural deposit from the cement in the blocks. It is temporary and not a sign of poor quality. It forms more often in winter and usually weathers away within a year or two.

How soon can a new block paving driveway be used?

Concrete block paving can be used as soon as the laying is complete, with no curing time. Inspect the joints regularly in early life and top up any sand that has washed out.

What Our Customers Say

5.0 Google Reviewsfrom 50 reviews on Google

More Blogs

View all posts

Arrange a Free Consultation & Quote

We lay block paving driveways across Berkshire and Surrey, built on a properly compacted sub-base. Tell us a little about your garden and we'll get back to you within 24 hours to arrange a free visit and quote.

See our block paving driveways and Wokingham driveways pages.

Prefer to talk? Call us on 07462 187303 or email info@warnerlandscapes.co.uk.

Book your free consultation

Leave your details and our team will get back to you.

  • Free, no-obligation visit
  • Clear, written quote
  • Local team covering Wokingham and Berkshire
5.0 50 Google reviews
Call 07462 187303 Contact us